Dog Wash Operation

Operation Is Simple

The iClean Dog Wash is equipped with a big 11-inch touchscreen (iPad size). The HD touchscreen is protected with a Gorilla glass screen.
Start by placing your dog in the bathing area and secure with the supplied retainers.
Remove collar and lead.
#3

Now press the shampoo button on the touchscreen. Lift the spray nozzle and lift the lever. Be sure to point the nozzle away from the dog when first starting as the water is heated and needs a few seconds to settle to the right temperature.

#4

Once the water is tepid to warm start to shampoo your dog. Because the water and shampoo are mixed this is much quicker than shampooing at home in the bath or shower.

#5

When you feel that the dog is shampooed sufficiently, press the rinse button and rinse out the shampoo for approximately 1-2 minutes.

#6

After rinsing the shampoo, press conditioner and spray on your dog for 1 – 2 minutes. Rinse for 1-2 minutes.

#7

You can either use flea and tick wash or blow dry at this time. If you use flea and tick wash be sure to let it sit in and then rinse off.

#8

Use a towel and get the excess water off your dog and then take the drying nozzle and press blow dry low or high.